These are Nikon’s updates to 4 of its Tremendous-telephoto lenses
Nikon has launched updates to 4 of its super-telephoto Nikkor lenses: the Nikkor Z 800mm f/6.3 VR S, Nikkor Z 600mm f/4 TC VR S, Nikkor Z 400mm f/2.8 TC VR S, and Nikkor Z 400mm f/4.5 VR S.
All of those updates can be found through a firmware replace referred to as Model 1.10 and it’s value mentioning that these 4 lenses particularly are all among the many finest that Nikon produces.
As for what the updates give to those premium optics, the changes and enhancements embody new ring rotation vary choices and additional help for change focus and management run roles.
Should you occur to personal any of the above fashions, you may obtain the firmware updates on your specific lens(es) by visiting this web page on Nikon’s web site in your laptop. The updates can then be downloaded to a completely formatted SD card that you just insert into your digicam afterward.
When you’ve executed this, merely connect the lens whose firmware model you’ve downloaded to your digicam and activate it. Then enter your setup menu and test to see what present firmware your lens is supported by.
The method for really updating your lens firmware through your digicam is a little more convoluted than the above. Nikon’s web page for the firmware downloads has directions for doing it below the drop-down subsection labeled, “Updating the Lens Firmware”.
To provide you an advance take a look at what it requests, listed here are the precise directions:
- “Create a folder on the pc exhausting disk and identify it as desired.
- Obtain F-MLZ800F63VRS-V0110W.exe to the folder created in Step 1.
- Run F-MLZ800F63VRS-V0110W.exe to extract the next file to a folder named “Z800F63VRSUpdate”:
• MLZ800F63VRS0110.bin (the lens firmware) - Utilizing a card slot or card reader, copy “MLZ800F63VRS0110.bin” to a reminiscence card that has been formatted within the digicam.
Word: You should definitely copy the firmware to the basis (top-most) listing of the reminiscence card. The digicam won’t acknowledge the brand new firmware whether it is positioned in a folder below the basis listing. - Insert the reminiscence card into the digicam and switch the digicam on.
- Choose [SETUP MENU] > [Firmware version] and observe the on-screen directions to carry out the firmware replace.
- When a message is displayed stating that the replace is full, flip the digicam off and take away the reminiscence card.
- Flip the digicam on and ensure that the firmware has been up to date to the brand new model.”
Nikon additionally claims that you would be able to go to considered one of its approved service representatives to ask that they carry out the replace for you, presumably freed from cost. The firmware pager additionally features a extra detailed DIY information for doing the above your self, obtainable as a PDF right here.
For the precise hyperlinks to the firmware variations for every of the lenses talked about above, click on on the hyperlink under to whichever mannequin applies for those who personal considered one of these super-telephoto lenses:
Nikon’s replace process for its lenses is a little more cumbersome than these of another manufacturers, like Fujifilm, however not less than with the above process, you need to be capable of keep away from a catastrophic digicam failure.
Such a software program catastrophe occurred to customers of Fujifilm cameras not too long ago when attempting to replace sure choose cameras by the model by way of their Fujifilm apps through cell units. We coated this right here, and it’s value a learn for those who additionally personal a Fujifilm digicam.
