Peak Design Clutch Digicam Strap Overview

A clutch is a product I usually affiliate with vehicles. A Peak Design automobile modification line up? That might undoubtedly get my consideration. In any case, I don’t foresee them heading in that course anytime quickly (a lot to my dismay).

As one would count on, when I’m not driving, I’m strolling. When I’m out roaming the streets with a digital camera in hand, I often have my full-length digital camera strap wrapped and twisted round my wrist.

I’m not a giant fan of getting one thing hanging round my neck for too lengthy. However I would like the safety of getting my digital camera hooked up in a roundabout way.

I’ve had a number of totally different wrist/hand straps in my time, however up till a 12 months in the past I had been utilizing a Canon 5D Mk3 with a 24-70mm hooked up.

It was fairly weighty simply having it on my wrist and no weight being supported anyplace else, in order that they have been a fairly short-lived carrying answer.

However now with the A7iii the burden is sort of halved, so I figured I might give a hand grip digital camera strap one other go. It’s been a blended feeling utilizing the Peak Design Clutch, however I’ve grown fairly keen on it, so enable me to elucidate why under.

Peak Design Clutch V3 Specs

Weight: 50g (123g as packed)
Max Size: 29 cm (11.4″)
Min Size: 20 cm (8″)
Width: 51 mm (2″)

The Peak Design Clutch comes packaged with 2 Anchors, an Anchor Mount which attaches to the underside of the digital camera, a small triangle ring, a 4mm hex-key, and a helpful little pouch to hold your remaining equipment.

It may possibly connect to just about any digital camera, and should you don’t have a degree giant sufficient for the strap to loop via the small triangle ring might assist.

The underside Anchor Mount accommodates a 1/4-20 UNC thread (just like tripods) to connect to most cameras, and means that you can hook up a complete of 4 Peak Design Anchors.

There have been two earlier variations of the Clutch – this one is the newest, often called the Clutch CL3.

• Peak Design Clutch CL2 vs CL3

The important thing distinction between the 2nd and third era Peak Design Clutch is that the CL3 has a Normal Plate V3 that’s optimized for use with Peak Design’s Seize Clip V3.

Each are designed to be quick-connecting and quick-adjusting for optimum safety, sturdiness, and ease of use. 

Construct & Look

The Peak Design Clutch is constructed effectively, comfy, and easy to make use of.

Effectively, it’s undoubtedly a looker, and it’s undoubtedly Peak Design. From the primary look you’ll be able to inform it belongs of their line-up. The Peak Design Clutch is aesthetically pleasing, but very purposeful. One may say it’s what one would need in a life-partner.

After I say it’s undoubtedly Peak Design, what I imply is that it follows a steadiness of each type and performance. The supplies used are sturdy, fashionable, comfy and are chosen to proficiently serve their function. That is undoubtedly not a foul factor. They’re fairly heavy obligation.

Peak Design promote that the Clutch is “Produced from premium supplies and customized {hardware} impressed by high-end climbing gear” and that the “Clutch’s exterior shell is created from the identical materials that whitewater rafts are made from”.

Oh and the 2 different vital info embody that it’s “Robust sufficient to carry any professional digital camera/lens/accent combo” and your fingers received’t sweat from it both.

The padding is comfortable and never cumbersome, the strap is agency and tight, and the clip is fashionable and powerful. Simply what you want whenever you’re carrying a digital camera that you will need to care about. However comfy sufficient to make use of it for an prolonged time frame.

Ease of Use

It’s a two step course of to utilizing it as soon as fitted.

I truly had some bother threading the strap of the Peak Design Clutch via the little steel attachment on my digital camera, however as soon as it was on there it was not going anyplace else!

The strap materials that you just loop via the attachment is fairly stable and never significantly malleable at first. I’ve since hooked up and eliminated it a variety of occasions for the sake of this assessment, and it’s undoubtedly softened up since.

The Anchor Mount on the backside, nonetheless, that was a fairly seamless expertise. You join that identical to you’d a tripod plate and to tighten it you utilize the included 4mm hex-key (Allen Key/Allen Wrench).

Remember to be aware that after you have the Anchor Mount put in, you received’t have the ability to connect your digital camera to a tripod with out first eradicating it.

If you happen to lose your included hex-key, you should utilize another 4mm hex-key. It’s not a propriety product or measurement. However don’t go rummaging via your previous Ikea packing containers, I already tried that, it seems they have a tendency to solely ever embody 3mm or 5mm sizes!

To regulate the size of the Peak Design Clutch, pull on the unfastened strap and slide it via the bracket, that’ll tighten up the scale. It may be a contact troublesome to readjust the size whereas utilizing it, so finest to repair that up beforehand. It’s that straightforward to arrange!

So now you’ve acquired your Clutch arrange, you’re able to rock and roll. Right here’s how you utilize it:

Step 1: Insert Hand.

Step 2: Don’t let go!

However wait! Now you’re out and about, and also you’ve come to understand that you could be be a little bit bit clumsy at occasions. You is perhaps considering, “if I journey over, I tend to launch something that I’m carrying throughout the road. I like my digital camera, I don’t wish to ship it wildly flying via the air! What can I do?”

Effectively, let me inform you what you are able to do. You’ll be able to exit and seize your self a few additional Anchors and strap these little dangerous boys in to the underside Anchor Mount!

If you happen to use one other pair of Peak Design Anchor Hyperlinks you’ll be able to connect another strap you personal to your digital camera alongside aspect your fancy new Peak Design Clutch.

I hooked up two additional Anchors to the Anchor Mount so I might additionally use the Peak Design Slide Lite.

Or, if like me, you additionally personal a Peak Design Slide Lite you’ll be able to hook that up. This manner you’ve got a alternative, you’ll be able to both use simply the Peak Design Clutch, use the strap, or should you’re a wild little one like me, you should utilize each!

If you happen to’re not clumsy and also you’re fairly a sturdy individual, you’re all set and able to go. You’ll get pleasure from your Peak Design Clutch! And if something is mistaken with it, Peak Design provide a lifetime guarantee on their merchandise. Simply hit them up they usually’ll type your proper out.

Connect the important thing ring to your tripod or your bag so that you all the time have it with you in case it is advisable to take away the Anchor Mount

Peak Design Clutch Overview | Conclusion

I’ve determined that one of the best answer for me is to make use of the Peak Design Clutch together with the Slide Lite.

I’ll admit, the Peak Design Clutch is just not for everyone, neither is it nice in each state of affairs. Some might want the added safety of getting the digital camera hooked up to your physique in another approach, different than simply in your hand.

You may additionally wish to relieve your fingers of digital camera carrying obligation and depend on your neck or shoulder as a substitute. You might wish to free your fingers in order that they’re in a position to do different helpful sort stuff.

Whereas I, at first, was not too keen on this as a carrying answer, I’ve now come to the conclusion that when paired with the Peak Design Slide Lite, it’s a nice answer.

Having the safety of a full-length strap with the steadiness and luxury of the Peak Design Clutch, I really feel it is a nice pairing. This may in all probability change into my on a regular basis answer now.

With out the Slide Lite, I like having another option to put the digital camera down and free my fingers. Similar to slipping it again in to my bag, or passing it to my spouse to hold for me. It’s solely truthful after all of the numerous purchasing luggage I carry for her!